MAINTENANCE REQUIRED LIGHT HOW TO

The Tacoma is a midsize truck engineered to take you where you want to be on or off the road. What Does the Toyota Tacoma Have to Offer? Switch the ignition off and then turn on the vehicle to see if the process was successful.Use the arrows to scroll to the section Maintenance Reset and press Yes to confirm.Using the up and down arrow buttons, select Settings and confirm with the middle button.Use the left and right arrow buttons to select the Gear Icon on the display.Press and release the Power button, but do not hold the brake as that will activate the vehicle electronics.You can do most of the vehicle settings from the display.

MAINTENANCE REQUIRED LIGHT HOW TO

How to Reset Maintenance Light on 2018 or Newer Toyota Tacoma

Your maintenance light is already reset, and you can turn the vehicle on to test if the steps worked.

Release the Odo/Trip button when the meter reads all zeros.

While still holding the Odo/Trip button, switch the vehicle ignition to ON, but do not start the engine.

Turn your vehicle off and then press and hold the Odo/Trip button.

When the ignition is ON, press the Odo/Trip button (also known as the display change button) so that the display changes to “Trip A.”.

If your model has a push-button start, press the “Start” button, but keep your foot off the brake pedal.

Turn the vehicle’s ignition to the ON position, but do not start the engine.

You can reset the maintenance light as follows: When you drive for 5,000 miles, the maintenance light illuminates and stays lit until you perform the necessary maintenance and reset it. Toyota Tacoma models from 2012 to 2017 are more advanced.Īfter driving for 4,500 miles, the maintenance light illuminates for about three seconds and then flashes for about 15 seconds. How to Reset Maintenance Light on 2012 – 2017 Toyota Tacoma

If the maintenance light still shows, try the step again from the first.

Turn off the ignition and turn the vehicle on to see if the steps above worked.

The odometer will blink and briefly display all zeros when the reset is complete.

Keep holding the Trip stem button for five more seconds.

While still holding the Trip stem button, turn the ignition to the ON position.

Press the Trip stem button on the instrument panel and hold it in that position.

Models from 2011 or earlier show Maint Reqd message on the instrument cluster display when it is time for an oil change.Īfter the oil change, you can reset the light as follows: How to Reset Maintenance Light on 2011 or Older Toyota Tacoma

Newer models have a more advanced display that controls the maintenance light, requiring a few more complicated steps to reset.īelow are some simple steps on how to reset the maintenance light on different models. On older models, you can reset the maintenance light by pressing the Trip stem button or the Trip/Odo button.

It comes with a maintenance system that tracks the mileage age of the engine oil, and driving conditions.Īfter every 5,000 miles, the maintenance light will come on notifying you that your vehicle needs maintenance.Īfter the maintenance, you need to reset the light so that the vehicle can go back to tracking distance, time, and other factors.īut how do you reset the maintenance light on a Toyota Tacoma? How To Reset The Maintenance Light On A Toyota Tacoma

Maintenance required light